Order Products : sales@su-jiao.com
ENFLEX VU-424-65A
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Ravago Group |
| Trademark: | ENFLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BBXI0T_ENFLEX-VU-424-65A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Economical, vulcanized EPDM/PP series |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 65 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% Strain | 2.40 | MPa | |
| 300% Strain | 3.70 | MPa | |
| Tensile Stress (Break) | 7.90 | MPa | ISO 37 |
| Tensile Elongation (Break) | 670 | % | ISO 37 |
| Tear Strength | 36 | kN/m | ISO 34-1 |
| Compression Set | ASTM D395B | ||
| -25°C, 22 hr | 7.0 | % | |
| 23°C, 22 hr | 17 | % | |
| 70°C, 22 hr | 42 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 336 hr) | 1.1 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (125°C, 336 hr) | 600 | % | ISO 188 |
| Change in Shore Hardness in Air (Shore A, 125°C, 336 hr) | 1.0 -1.0 | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -55.0 | °C | ISO 974 |
| Maximum Dynamic Service Temperature | 135 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® B3 GF 40 natural (2474) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| AXELERON™ CC 3485 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| Desmopan® 192 | Covestro - PUR | TPU-Polyester | Desmopan® |
| Iupiace® LV40 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Celanex® 3300HR | Celanese Corporation | PBT | Celanex® |
