Order Products : sales@su-jiao.com
NuSil MED10-6400
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BAzkcD_NuSil-MED10-6400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. "Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fillers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is beneficial for applications wherein a thin film coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha. Comments: 1.43 R.I. IN XYLENE |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (200% Strain) | 2.41 | MPa |
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.430 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.08 | g/cm³ | |
| Viscosity | 0.60 | Pa·s | |
| Curing Time 1 | 3.5 | hr | |
| Pot Life (25°C) | 1400 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 30 | ||
| Tensile Strength | 10.3 | MPa | |
| Tensile Elongation at Break | 780 | % | |
| Tear Strength | 26.3 | kN/m |
| Note Message | |
|---|---|
| 1 . | 30m/25°C + 45m/75°C + 135m/150°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ ULTALUX FP | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| HiFill FR® ABS/PBT FR | Techmer Engineered Solutions | ABS+PBT | HiFill FR® |
| KOPET® KP133G45 | Kolon Plastics, Inc. | PET | KOPET® |
| ISPLEN® PB 141 G2M | REPSOL | PP Impact Copolymer | ISPLEN® |
| Hylex® P1032L1 | Entec Polymers | PC | Hylex® |
