Order Products : sales@su-jiao.com
NuSil CV-2960
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BAoYLr_NuSil-CV-2960.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space
Comments: 0.8 W/m-K, Primed Lap Shear 205 psi (1.4 MPa), Low Viscosity |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 2.8E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.80 | W/m/K | ASTM E1530 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 10 | ||
| Part B | Mix Ratio by Weight: 1.0 | ||
| Tack Free Time | 3.0 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | White | ||
| Density | 1.34 | g/cm³ | |
| Viscosity 1 | 130 | Pa·s | |
| Curing Time (23°C) | 1.7E+2 | hr | |
| Pot Life | 90 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 60 | ||
| Lap Shear Strength 2 | 1.41 | MPa | |
| Tensile Strength | 1.41 | MPa | |
| Tensile Elongation at Break | 110 | % | |
| Tear Strength | 7.88 | kN/m |
| Note Message | |
|---|---|
| 1 . | Part A |
| 2 . | Primed with CF1-135 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEDUR® L 9200-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| TCA Lite® CSP 852MD | Continental Structural Plastics | Polyester, TS | TCA Lite® |
| NuSil FS-3730-11 | NuSil Technology | Silicone | NuSil |
| INLUBE PA66GF30TF13SI2 | Infinity LTL Engineered Compounds | Nylon 66 | INLUBE |
| KEBAFLEX® E 65.1 | BARLOG plastics GmbH | TPV | KEBAFLEX® |
