Order Products : sales@su-jiao.com
Prime Tuff-X 200
| Category: | Unspecified , Unspecified |
| Manufacturer: | Primex Plastics Corporation |
| Trademark: | Prime Tuff-X |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B7NPq1_Prime-Tuff-X-200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prime Tuff-X 200 is an engineered alloy that fills the gap between engineered plastics and high performance Polyolefins. Prime Tuff-X 200 has a very low C.L.T.E., excellent impact, UV protection and is highly chemical resistant. Applications: Ideal for ; automotive, power tools, irrigation, electronics, lawn and garden and RV applications. Processing: Prime Tuff-X 200 is a Semi-crystalline material that behaves differently in the thermoforming process when compared to an amorphous material. Ideal forming conditions; Mold temp. 170-190°F, Sheet temp. 320-360°F, part removal temp.145-170°F. Aluminum temperature controlled grit blasted tools are preferred. Ceramic tools can also work well if it is glass bead blasted. Quartz or ceramic heaters are preferred when working with Tuff-X. Calrod heaters can sometimes be used but gas fired is not recommended. Finishing: Tuff-X 200 can be fabricated by using many techniques such as; drilling, routing, punching, sawing, laser or die cut. Mechanical screws and other type of fasteners may be used to join Tuff-X 200 parts together. It may also be bonded with certain types of adhesives. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Our Tuff-X 200 material will accept any color imaginable, furthermore, this product can be painted with a two part paint system. Tuff-X 200 is offered in gauges from .090 to .400 in. and in widths up to 120". Tuff-X 200 is offered in several different patterns that include; FL/HC, H/C, Diamond Plate, Smooth and Levant II. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 0.60 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.5 | MPa | ASTM D638 |
| Flexural Modulus | 2120 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 64 | J/m | |
| 23°C | 830 | J/m | |
| Instrumented Dart Impact (-30°C) | 5.76 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 101 | °C | |
| 1.8 MPa, Unannealed | 58.9 | °C | |
| CLTE - Flow | 4.9E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (> 1.50 mm) | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| De-mold Temperature | 63 to 77 | °C | |
| Mold Temperature (other) | 77 to 88 | °C | |
| Sheet Temperature | 160 to 182 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYshine PBT D221 GF10 | Polykemi AB | PBT | POLYshine |
| Sylvin 8270-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Wellamid® FRGF25-66 NBK3 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Formolene® 6613N | Formosa Plastics Corporation, U.S.A. | PP Copolymer | Formolene® |
| KPOL-NYLON K-NY6/27WF | KPOL Chem Co. | Nylon 6 | KPOL-NYLON |
