Order Products : sales@su-jiao.com
KRATON® D1102 E
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B58wbN_KRATON-D1102-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature:
Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 12 | g/10 min | ISO 1133 |
| Antioxidant Additive | > 0.15 | % | Internal Method |
| Ash Content | ISO 247 | ||
| ES | 0.15 to 0.40 | % | |
| ESM | 2.5 to 5.0 | % | |
| ET | 0.15 to 0.40 | % | |
| Polystyrene Content | 27 to 30 | % | Internal Method |
| Solution Viscosity - (Toluene) 25%wt (25°C) | 0.75 to 1.5 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 17.0 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 30 sec, Compression Molded) | 66 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 2.90 | MPa | ISO 37 |
| Tensile Strength 2(Yield) | 33.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 880 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Typical properties determined on film cast from toluene solution |
| 2 . | Typical properties determined on film cast from toluene solution |
| 3 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAPPO™ J930 | Mando Advanced Materials Co., Ltd. | PPE+PS | TEKAPPO™ |
| Telcar® TELC-1000-105 | Teknor Apex Company | TPE | Telcar® |
| Stanyl® TE373 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Arylmax® K7500CF30 | Polymics, Ltd. | PAEK | Arylmax® |
| Comco PA 12 G | Comco-Plastic GmbH | Nylon 12 | Comco |
