Order Products : sales@su-jiao.com
Forprene® 6NM001A55
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B50wiw_Forprene-6NM001A55.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Forprene® 6NM001A55 is a Thermoplastic Vulcanizate (TPV) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Forprene® 6NM001A55: REACH Compliant. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 57 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 10 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 1.60 | MPa | ASTM D412 |
| Tensile Strength 2 | 4.30 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 480 | % | ASTM D412 |
| Tear Strength 4 | 20.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 32 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 160 | °C | |
| Middle Temperature | 170 | °C | |
| Front Temperature | 180 | °C | |
| Nozzle Temperature | 185 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® HP 2000 BK | Plastic Solutions, Inc. | PP Homopolymer | PrimaFlex® |
| Nypol® PA A3 G25 PRTA011 NR306 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Ebalta LH 28-1 / TM | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| Epoxies, Ect. 60-7158 | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| ICORENE® 9033 BA8 | ICO Polymers SA, A Division of A. Schulman | PE, Unspecified | ICORENE® |
