Order Products : sales@su-jiao.com
Geon™ 180 Series 180X5
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 180 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B4rwfI_Geon-180-Series-180X5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® 180X5 is low molecular weight resin that provides good chemical foam characteristics with excellent overblow resistence. The modified rheology of Geon® 180X5 provides increased viscosity and yield throughputs. Geon® 180X5 is recommended for applications where high Brookfield Viscosity and yield are required such as highly plasticized low density chemcially blown foams, plastisol screen inks, coated fabric applications requiring low 'wicking' characteristics, and highly plasticized formulations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 65.0 | Internal method | |
| Intrinsic Viscosity | 0.90 | ASTM D1243-60-A | |
| Humidity- Karl Fisher 2 | 0.070 | % | Internal method |
| Volume density | 400 | g/l | |
| Relative Viscosity 3 | 2.20 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretch- PP 4 | 19.3 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss- 60 degree fused 5 mins @ 350F 5 | 90 | % | Internal method |
| Transparency-light transmittance 6 | 65 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 7 | 46.4 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 8 | 18.0 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 9 | 51.9 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 10 | 22.1 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 11 | 78.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| North fineness 12 | 4.75 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 13 | ppm | Internal method | |
| Methanol extractable 14 | 4.2 | % | Internal method |
| polymerization process | Dispersion | ||
| Gel temperature- PP 15 | 68 | °C | Internal method |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC and ASTM D638 (formulation): 100phr Geon® 180X5, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 390 (formulation): 100phr Geon® 180X5, and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Interrelationship |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | Interrelationship |
| 4 . | With provided formulation |
| 5 . | 60°，FF，ALTC-65 |
| 6 . | PP，ATLC-66 |
| 7 . | Initial V2,Geon®1253 |
| 8 . | Initial, V20,Geon®1253 |
| 9 . | One day, V2 |
| 10 . | One day, V20 |
| 11 . | 95 psi，Geon® 1010 |
| 12 . | Geon® 390 |
| 13 . | Geon® STP 1005 |
| 14 . | Geon® 894 |
| 15 . | Geon® ALTC 29 (with provided formulation) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T- 27 GF20 FRV0 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Braskem PP TI6550WV | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
| LNP™ THERMOCOMP™ JF004L compound | SABIC Innovative Plastics | PESU | LNP™ THERMOCOMP™ |
| PETOPLEN EH 341 | PETKIM Petrokimya Holding A.S. | PP, Unspecified | PETOPLEN |
| ULTEM™ 2210F resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
