Order Products : sales@su-jiao.com
Maxelast® F02-074B-8
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantong Polymax Elastomer Technology, Co., Ltd |
| Trademark: | Maxelast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B4P7gm_Maxelast-F02-074B-8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Maxelast® F02-074B-8 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America for extrusion. Important attributes of Maxelast® F02-074B-8 are:
Typical application of Maxelast® F02-074B-8: Wire & Cable |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 7.60 | MPa | |
| 300% Strain | 8.66 | MPa | |
| Tensile Strength (Yield) | 11.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 580 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAFMER™ A-1085S | Mitsui Chemicals America, Inc. | PAO | TAFMER™ |
| Sylvin 9734-73 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Alathon® ETP H4837 | LyondellBasell Industries | HDPE | Alathon® ETP |
| Anjacom® R250-H/GF30 | Almaak International GmbH | Nylon 6 | Anjacom® |
| Enable™ 20-10 Series | ExxonMobil Chemical | mPE | Enable™ |
