Order Products : sales@su-jiao.com
Moharamplast HDPE MP-COAT 5205
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Moharamplast S.A.E |
| Trademark: | Moharamplast HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B39376_Moharamplast-HDPE-MP-COAT-5205.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A black high density polyethylene compound containing >2% well dispersed carbon black class A1 to ensure outstanding weather resistance, the added carbon black type is less sensitive to moisture despite the hygroscopic behavior due to its fine particle size.Antioxidants, processing aids and other additives are added to obtain excellent long term properties and a better processability ensuring protection against extreme external conditions, mechanical impacts and degradation by heat or UV irradiation. MP-COAT 5205 can be used up to 85°C service temperature of the pipeline when combined with the grafted adhesives. Safety MP-COAT 5205 is classified as no-dangerous material. We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet. Typical Applications MP COAT-5205 is designed for use in (3LPE) steel pipe coating systems, suited for high temperature pipeline applications in conjunction with an epoxy primer and a polyolefin adhesive so mainly used for coating steel pipes in oil and gas applications and thus help in minimizing the potential for corrosion of underground steel pipes. Specifications MP-COAT 5205 fulfills the requirements of ISO 21809-1, DIN 30 670-S AND DNV-RP-F106 standards when the product is processed using the correct extrusion practice and testing procedures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.952 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.50 | g/10 min | ASTM D1238 |
| 190°C/5.0 kg | 2.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F20) | > 1000 | hr | ASTM D1693 |
| Carbon Black Content | > 2.0 | % | ASTM D1603 |
| Carbon Black Dispersion | A1 | ISO 11420 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 200 - 210 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | > 56 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | > 18.6 | MPa | ASTM D638 |
| Fracture | > 21.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 800 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | > 120 | °C | ASTM D1525 |
| Melting Temperature | 129 | °C | ASTM D2117 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 90.0 | °C | |
| Cylinder Zone 1 Temp. | 190 - 210 | °C | |
| Cylinder Zone 2 Temp. | 190 - 210 | °C | |
| Cylinder Zone 3 Temp. | 190 - 210 | °C | |
| Cylinder Zone 4 Temp. | 190 - 210 | °C | |
| Cylinder Zone 5 Temp. | 190 - 210 | °C | |
| Melt Temperature | 220 - 240 | °C | |
| Die Temperature | 200 - 220 | °C |
| Extrusion instructions |
|---|
| Max recommended melt temperature: < 260 °CDue to hygroscopic behavior of carbon black and such a compound will be sensitive to moisture. Even as low moisture as 0.04% can give the pipe a bad surface . Despite the fact that the type of the carbon black used in MP-COAT 5205 is of less sensitive type, storage for a long time or under unfavorable conditions can increase the moisture content. We therefore recommend drying before extrusion. For normal extrusion conditions and applications we suggest preheating and drying with a maximum preheating temperature of 90°C. |
| Note Message | |
|---|---|
| 1 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1205-70D TFE 20 | RTP Company | TPU-Polyester | RTP |
| Torelina® A670X01 | Toray Resin Company | PPS | Torelina® |
| AIE PA6 50G6 | Asia International Enterprise (Hong Kong) Limited | Nylon 6 | AIE PA6 |
| Caltex PP M540S | GS Caltex | PP Impact Copolymer | Caltex PP |
| Arnite® TV4 461 | DSM Engineering Plastics | PBT+PET | Arnite® |
