Sarlink® TPE FM-2669 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPE FM-2669 is a general purpose thermoplastic elastomer available in Nat, Blk, and colors, used in a variety of automotive interior applications including floor mats. Sarlink TPE FM-2669 is a UV stabilized, medium hardness, high density, wear-resistant grade suitable for extrusion, injection molding, or thermoforming.

General Information
Features	High specific gravity High density Good UV resistance Workability, good Good coloring Good adhesion Low liquidity Good chemical resistance Good wear resistance Good toughness Fill Medium hardness
Uses	Application in Automobile Field Car interior parts Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black Available colors Natural color
Forms	Particle
Processing Method	Extrusion Thermoforming Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.15	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.10	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shore A, 1 second, injection molding	79	ISO 868
Shore A, 5 seconds, injection molding	75	ISO 868
Shore A, 15 seconds, injection molding	74	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (Break)	6.00	MPa	ISO 37
Tensile Elongation (Break)	500	%	ISO 37

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	227 - 249	°C
Middle Temperature	227 - 249	°C
Front Temperature	227 - 249	°C
Nozzle Temperature	227 - 249	°C
Processing (Melt) Temp	227 - 249	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	216 - 238	°C
Cylinder Zone 2 Temp.	216 - 238	°C
Cylinder Zone 3 Temp.	216 - 238	°C
Cylinder Zone 4 Temp.	216 - 238	°C
Cylinder Zone 5 Temp.	216 - 238	°C
Die Temperature	216 - 238	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	B1RodL_SarlinkTPEFM2669PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 881	RTP Company	Acetal (POM) Copolymer	RTP
SHIN-A SE-5000MPM70	SHIN-A T&C	Epoxy	SHIN-A
Spartech Polycom SCR2-1090	Spartech Polycom	PS (HIPS)	Spartech
Later 4 G/30-V0	LATI S.p.A.	PBT	Later
Karina CRYSTAL PVC COMP - E 63/203-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina