Order Products : sales@su-jiao.com
Bapolene® 0760
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Bamberger Polymers, Inc. |
| Trademark: | Bapolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B0P9kh_Bapolene-0760.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is a high density polyethylene homopolymer for blow molding applications. It is recommended for applications that require high top load strength and good stiffness. This product meets 21CFR177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | 10.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 300 | % | ASTM D638 |
| Flexural Modulus - Tangent 3 | 1550 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXNITE® PBT 550 GF30 | MRC Polymers, Inc. | PBT | MAXNITE® PBT |
| Promyde® B30 P2 G35 | NUREL, S.A. | Nylon 6 | Promyde® |
| HiFill® PA4/6 GF50 HS BK | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Lumid® HI1102B(W) | LG Chem Ltd. | Nylon 66 | Lumid® |
| LUVOCOM® 1-0889-5 | LEHVOSS Group | Nylon 66 | LUVOCOM® |
