Order Products : sales@su-jiao.com
Sinvicomp SIZ4501
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AzGMER_Sinvicomp-SIZ4501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SINVICOMP SIZ4501 is a flexible polyvinyl chloride material,. This product is available in the Asia-Pacific region and is processed by extrusion. The main features of SINVICOMP SIZ4501 are: ROHS certification. The typical application field of SINVICOMP SIZ4501 is: wire and cable |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.49 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 168 hr 2 | IEC 811-1-2 | ||
| Tensile strength change | 10 | % | IEC 811-1-2 |
| Change in tensile elongation | 12 | % | IEC 811-1-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 2.0E+14 | ohms·cm | BS 2782 230A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - Oven Ageing Condition @ 80 ± 2°C for 7 days | 1.20 | mg/cm² | IEC 811-3-2 |
| Typical temperature profile for SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CMixing zone: 160°C~170°CMetering zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | @ 23°C |
| 2 . | @ 80 ± 2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 2206-15 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| RTV-2 P-125 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| RTP 799 A X 104857 | RTP Company | LDPE | RTP |
| SureSpec PET-80 | Genesis Polymers | PET | SureSpec |
| KOPLA PA6 KNG1050 | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
