Order Products : sales@su-jiao.com
Generic PVC, Flexible
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AukgHc_Generic-PVC-Flexible.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PVC, Flexible This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.15 - 1.45 | g/cm³ | ASTM D792 |
| 23°C | 1.16 - 1.40 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (23°C) | 0.95 - 2.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 54 - 92 | ASTM D2240 | |
| 23°C | 40 - 96 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1.44 - 79.0 | MPa | ASTM D638 |
| Tensile Strength | |||
| Yield, 23°C | 8.91 - 20.2 | MPa | ASTM D638 |
| Yield, 23°C | 8.00 - 22.4 | MPa | ISO 527-2 |
| Fracture, 23°C | 5.74 - 25.7 | MPa | ASTM D638 |
| Fracture, 23°C | 7.41 - 20.2 | MPa | ISO 527-2 |
| 23°C | 2.20 - 23.6 | MPa | ASTM D638 |
| 23°C | 2.30 - 17.3 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield, 23°C | 270 - 490 | % | ASTM D638 |
| Fracture, 23°C | 200 - 450 | % | ASTM D638 |
| Fracture, 23°C | 240 - 430 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 23°C) | 2.00 - 17.3 | MPa | ASTM D412 |
| Tensile Strength | ASTM D412 | ||
| Yield, 23°C | 9.18 - 23.5 | MPa | ASTM D412 |
| Fracture, 23°C | 6.62 - 20.0 | MPa | ASTM D412 |
| Tensile Elongation | |||
| Fracture, 23°C | 300 - 410 | % | ASTM D412 |
| Fracture, 23°C | 300 - 400 | % | ISO 37 |
| Tear Strength (23°C) | 22.9 - 85.8 | kN/m | ASTM D624 |
| Compression Set | 18 - 60 | % | ASTM D395 |
| Clash-Berg Modulus (23°C) | 297 | MPa | ASTM D1043 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 59.6 - 105 | °C | ASTM D794 |
| Brittleness Temperature | -51.4 - -14.2 | °C | ASTM D746 |
| Melting Temperature | 159 - 179 | °C | |
| RTI Elec | 50.0 - 90.0 | °C | UL 746 |
| RTI | 50.0 - 90.0 | °C | UL 746 |
| UL Temperature Rating | 60 - 105 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 2.5 - 7.5E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C) | 2.87 - 5.28 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.031 - 0.096 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 22 - 32 | % | ASTM D2863, ISO 4589-2 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 79.8 - 85.0 | % | ASTM D1003 |
| Haze | 3.0 - 5.0 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 165 - 202 | °C | |
| Mold Temperature | 23.9 - 24.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PVC, FlexibleThis information is provided for comparative purposes only. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 133 - 182 | °C | |
| Cylinder Zone 2 Temp. | 145 - 160 | °C | |
| Cylinder Zone 3 Temp. | 149 - 181 | °C | |
| Cylinder Zone 4 Temp. | 123 - 171 | °C | |
| Cylinder Zone 5 Temp. | 138 - 340 | °C | |
| Adapter Temperature | 123 - 177 | °C | |
| Melt Temperature | 164 - 192 | °C | |
| Die Temperature | 164 - 177 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PVC, FlexibleThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 100 MG GB 15 | RTP Company | PP, Unspecified | RTP |
| Supol HR580 | LyondellBasell Industries | PP, Unspecified | Supol |
| DynaMix™ 4100-28CF | Polymer Dynamix | PPA | DynaMix™ |
| LinGen FR298 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | LinGen |
| Sylvin 9067-80 White 125 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
