Order Products : sales@su-jiao.com
FireCon™ CPE 30-33 RoHS BLACK
| Category: | CPE , Chlorinated Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | FireCon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AnbcUE_FireCon-CPE-30-33-RoHS-BLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The filled flexible thermoplastic CPE sheath compound material is a good choice for low-voltage power and cable control cables. Wire and cable manufacturers can use products for thermoplastic extrusion processing without investing in continuous vulcanization (CV) equipment. CPE 37-11 has been improved in terms of elasticity and ductility, while the brittleness has also been reduced, and it feels more rubber to touch. This combination material can replace thermosetting CPE materials in power, control cables and other applications. |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 15 | g/10 min | ASTM D1238 |
| Appearance | Particles/cubes | ASTM D2090 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 39 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 450 | % | ASTM D638 |
| Flexural Modulus 3 | 6.41 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -33.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (1.91 mm) | 30 | % | ASTM D2863 |
| Additional Information |
|---|
| 注释：推荐的预干燥为在175°-185°F环境下4小时。注释：根据螺旋设计不同，典型加工温度处于320° - 390°F之间。请联系技术服务部，获取特定设备的推荐。注释：模制厚板的典型属性（0.075"）；不能视为技术规格。 |
| Note Message | |
|---|---|
| 1 . | Type 4, 510mm/min |
| 2 . | Type 4, 510mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A 35 990 E GRI | Radici Plastics | Nylon 66 | Radilon® |
| Ultramid® B3EG7 BK00564 | BASF Corporation | Nylon 6 | Ultramid® |
| CERTENE™ LLBF-0822D | Muehlstein | LLDPE | CERTENE™ |
| Formolene® L42009A | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Dapol® D2200F | Fudow Co., Ltd. | DAP | Dapol® |
