Order Products : sales@su-jiao.com

Argothane® D7101

Category:	TPU, Unspecified , Thermoplastic Polyurethane Elastomer
Manufacturer:	Argotec LLC
Trademark:	Argothane®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Amkt5V_Argothane-D7101.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Thermoform

Die cut and seal

Characteristics:

Rigid, thermoformable

High impact resistance

Low moisture absorption

Dimensionally stable

Clear surface

Abrasion resistance

No plasticizers to migrate & cause embrittlement

Resistance to hydrocarbons, chemicals, ozone

Resistance to skin oils

RF, ultrasonic and heat weldable

High draw-down ratio.

General Information
Features	Good Abrasion Resistance Good Chemical Resistance Good Dimensional Stability Good Drawdown Good Impact Resistance Good Ultrasonic Properties High Clarity High Rigidity Hydrocarbon Resistant Low to No Water Absorption Oil Resistant Ozone Resistant Ultrasonic Weldable Weldable
Uses	Seals Thermoforming Applications
Processing Method	Die Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.20	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	72		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	69.0	MPa	ASTM D638
Flexural Modulus	2300	MPa	ASTM D790

Elastomers	Nominal Value	Unit	Test Method
Tensile Elongation (Break)	160	%	ASTM D412

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-40°C, 3.20 mm	59	J/m
23°C, 3.20 mm	85	J/m

Extrusion	Nominal Value	Unit
Melt Temperature	63.0 to 85.0	°C

Resin Grade	Manufacturer	Category	Trademark
SLOVASTER® B GF 50	Plastcom	PBT	SLOVASTER®
SLOVALEN® PH 66 GF 20 FRO 4	Plastcom	PP, Unspecified	SLOVALEN®
NYLAFORCE® B 50 Z SCHWARZ	LEIS Polytechnik - polymere Werkstoffe GmbH	Nylon 6	NYLAFORCE®
Dryflex® 605550	ELASTO	TPE	Dryflex®
PENTAMID B GV35 H natur	PENTAC Polymer GmbH	Nylon 6	PENTAMID B