Order Products : sales@su-jiao.com
Magnobond 108
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Magnolia Plastics, Inc. |
| Trademark: | Magnobond |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AmgyWn_Magnobond-108.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Magnobond 108 is an Epoxy; Epoxide (Epoxy) product. It is available in North America. Typical application: Adhesives/Tapes. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.668 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.038 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Modulus | 2990 | MPa | ASTM D695 |
| Compressive Strength | 38.6 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 18 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (25°C) | 29 | min | |
| Shelf Life | 26 | wk | |
| Demold Time (25°C) | 300 | min | |
| Post Cure Time (71°C) | 1.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PQ 83 T 10 | Plastcom | PP+EPDM | SLOVALEN® |
| HiFill® HTN 0153 S1 AHW NAT | Techmer Engineered Solutions | Nylon, Unspecified | HiFill® |
| Kumho SBR 1507L | Korea Kumho Petrochemical Co., Ltd. | SBR, Emulsion | Kumho SBR |
| Aquivion® D79-25BS-Li | Solvay Specialty Polymers | PFSA Lithium Salt | Aquivion® |
| Sylvin 8785-80 Green 3147 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
