Sarlink® TPE ME-2665B BLK (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink ME-2665B BLK XRD is a low density high flow TPE designed for automotive exterior applications including window encapsulation. This is a UV stabilized grade suitable for injection molding.

General Information
Features	Low Specific Gravity Sunlight Resistant Low density Light stabilization High liquidity Fill Medium hardness UV absorption
Uses	Automotive Window Encapsulation Application in Automobile Field Automotive exterior parts
Appearance	Black
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.939	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shore A, 1 second, injection molding	67	ISO 868
Shore A, 5 seconds, injection molding	62	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ISO 37
Transverse flow : 100% strain	1.60	MPa	ISO 37
Flow : 100% strain	1.89	MPa	ISO 37
Tensile Stress ²			ISO 37
Transverse flow : Fracture	9.80	MPa	ISO 37
Flow : Fracture	7.90	MPa	ISO 37
Tensile Elongation ³			ISO 37
Transverse flow : Fracture	890	%	ISO 37
Flow : Fracture	770	%	ISO 37
Tear Strength ⁴			ISO 34-1
Transverse flow	26	kN/m	ISO 34-1
Flow	27	kN/m	ISO 34-1
Compression Set ⁵			ISO 815
23°C, 22 hr	23	%	ISO 815
70°C, 22 hr	35	%	ISO 815
90°C, 70 hr	56	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air - Across Flow ⁶			ISO 188
110°C, 1008 hr	0.0	%	ISO 188
100% strain 110°C, 1008 hr	13	%	ISO 188
125°C, 168 hr	3.1	%	ISO 188
100% strain 125°C, 168 hr	11	%	ISO 188
Changes in tensile stress upon fracture in air- Transverse flow ⁷			ISO 188
110°C, 1008 hr	3.2	%	ISO 188
125°C, 168 hr	5.3	%	ISO 188
Change in Shore Hardness in Air ⁸			ISO 188
Support a, 110°C, 1008 hr	3.4		ISO 188
Support a, 125°C, 168 hr	3.6		ISO 188

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	129	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	170 - 190	°C
Middle Temperature	175 - 195	°C
Front Temperature	180 - 205	°C
Nozzle Temperature	180 - 205	°C
Processing (Melt) Temp	180 - 205	°C
Mold Temperature	15.0 - 40.0	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 176°F (80°C).

Note Message
1 .	Type 1, 510mm/min
2 .	Type 1, 510mm/min
3 .	Type 1, 510mm/min
4 .	B method, right angle specimen (without cut), 510mm/min
5 .	Type a
6 .	Type 1
7 .	Type 1
8 .	5 sec

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AlHdgN_Sarlink-TPE-ME-2665B-BLK-PRELIMINARY-DATA-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Acrylloy F	Spartech Plastics	Acrylic, Unspecified	Acrylloy
Cabofor® 28 NATURALE	SO.F.TER. SPA	PC	Cabofor®
CERTENE™ LLHF-122D	Muehlstein	LLDPE	CERTENE™
GAPEX® RPP20EA10BK	Ferro Corporation	PP Homopolymer	GAPEX®
PENTAMID B S GV40 H natural	PENTAC Polymer GmbH	Nylon 6	PENTAMID B