Order Products : sales@su-jiao.com
RTP 102 Z
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AgUVtk_RTP-102-Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18mm, injection molding | 0.50 | % | ASTM D955 |
| 6.35mm, injection molding | 0.60 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 4200 | MPa | ASTM D638 |
| Tensile Strength | 36.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 9.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 3100 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 54.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 370 | J/m | ASTM D4812 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 - 227 | °C | |
| Middle Temperature | 193 - 227 | °C | |
| Front Temperature | 193 - 227 | °C | |
| Mold Temperature | 32.0 - 66.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ExxonMobil™ PP9122 | ExxonMobil Chemical | PP Random Copolymer | ExxonMobil™ |
| Hanwha Total PP TB52L | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| LONGLITE® PBT 3030-200S | CCP Group | PBT | LONGLITE® PBT |
| LOXIM 330 01 V0 | LOXIM Industries Private Limited | Nylon 6 | LOXIM |
| LUVOCOM® 1-8172 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
