Order Products : sales@su-jiao.com

EPDM 725P

Category:	EPDM , Hydrocarbon Rubber
Manufacturer:	The Dow Chemical Company
Trademark:	EPDM
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AgU4e9_EPDM-725P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EPDM 725P is a low viscosity semi-crystalline grade which offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems. It is designed for molded and extruded applications requiring low viscosity, high green strength, and high finished hardness. It is ideally suited for high hardness extruded profiles and molded goods. It can also be peroxide cured. Main Characteristics: Semi-crystalline Medium diene Low molecular weight Good green strength Applications: High hardness extruded profiles and molded goods Hoses Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details

Message

EPDM 725P is a low viscosity semi-crystalline grade which offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems. It is designed for molded and extruded applications requiring low viscosity, high green strength, and high finished hardness. It is ideally suited for high hardness extruded profiles and molded goods. It can also be peroxide cured.

Main Characteristics:

Semi-crystalline

Medium diene

Low molecular weight

Good green strength

Applications:

High hardness extruded profiles and molded goods

Hoses

Complies with

U.S. FDA 21 CFR 177.2600,

U.S. FDA 21 CFR 175.105 (Adhesives only).

Consult the regulations for complete details

General Information
Agency Ratings	FDA 21 CFR 175.105 FDA 21 CFR 177.2600
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.880	g/cm³	ASTM D297
Mooney Viscosity (ML 1+4, 125°C)	21 - 29	MU	ASTM D1646
Ethylene Content	68.0 - 72.0	wt%	ASTM D3900
Ethylidene Norbornene (ENB) Content	4.5 - 5.3	wt%	ASTM D6047
Propylene content	25.0	wt%	ASTM D3900
Residual conversion metal		ppm	Internal method
Molecular Weight Distribution	Medium		Internal method
Ash Content		wt%	ASTM D5667
Volatile Matter		wt%	Internal method

Additional Information
Storage and Handling:The quality of EPDM products may be affected by exposure to artificial or natural light. This product should be stored indoors in its original packaging and out of direct sunlight.

Resin Grade	Manufacturer	Category	Trademark
RTP 301 TFE 10 EM	RTP Company	PC	RTP
UMG ALLOY® CD900	UMG ABS, Ltd.	ASA+PC	UMG ALLOY®
FERREX® GPP20CS89HB	Ferro Corporation	PP Copolymer	FERREX®
Dynacom 701-G20	Dynachem Co. Ltd.	PP Copolymer	Dynacom
INEOS EMAA M24N430B	INEOS Olefins & Polymers Europe	EMAA	INEOS EMAA