Order Products : sales@su-jiao.com
Edgetek™ ATC-10GF/000 Black UV
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Af8Cek_Edgetek-ATC-10GF-000-Black-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Edgetek™ATC-10GF/000 Black UV is a polyoxymethylene (POM) copolymer product, which contains a 10% glass fiber reinforced material. It can be processed by injection molding and is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.45 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (190°C/2.16 kg) | 5.00 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3880 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Fracture | 9.00 | MPa | ISO 527-2 |
| -- | 55.0 | MPa | ISO 527-2 |
| Flexural Modulus | 3250 | MPa | ISO 178 |
| Flexural Strength | 80.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 4.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 68 | kJ/m² | ISO 179 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 190 - 200 | °C | |
| Middle Temperature | 190 - 200 | °C | |
| Front Temperature | 190 - 200 | °C | |
| Mold Temperature | 75.0 - 85.0 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 FRC 2 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Nypol® PA B3 G10 T20 HS PRTA011 NT310 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| Epoxies, Ect. 50-3186 NC | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| Hytrel® 40CB | DuPont Performance Polymers | TPC-ET | Hytrel® |
| Iupilon® EHG2010R | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
