Order Products : sales@su-jiao.com
Maxelast® F02-138A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantong Polymax Elastomer Technology, Co., Ltd |
| Trademark: | Maxelast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Aeil2u_Maxelast-F02-138A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Maxelast® F02-138A is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America for extrusion. Important attributes of Maxelast® F02-138A are:
Typical application of Maxelast® F02-138A: Wire & Cable |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 6.05 | MPa | |
| 300% Strain | 7.93 | MPa | |
| Tensile Strength (Yield) | 11.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 430 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XYRON™ AT602 | Asahi Kasei Chemicals Corporation | Nylon+PPE | XYRON™ |
| AIE PPO 9010F-SG20 | Asia International Enterprise (Hong Kong) Limited | PPE+PS | AIE PPO |
| ALCUDIA® EVA PA-407 | REPSOL | EVA | ALCUDIA® EVA |
| Daelim Po1y® LD-01 | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| Later 4 G/30-V0HF1 | LATI S.p.A. | PBT | Later |
