Index
About
Search
Contact Us
Order Products​ : sales@su-jiao.com

CALIBRE™ 302-6

Category: PC , Polycarbonate Resin
Manufacturer: Trinseo
Trademark: CALIBRE™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: AefXiW_CALIBRE-302-6.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
CALIBRE™ 300-6 Polycarbonate resins offer exceptional impact resistance, heat distortion resistance, and optical clarity as well as high melt strength for blow molding and sheet applications. The CALIBRE 300-6 series products are available in 4 additive packages: CALIBRE 300: No mold release or UV Stabilizer. CALIBRE 301: Mold release. CALIBRE 302: UV stabilizer. CALIBRE 303: Mold release and UV stabilizer.

Govt. and Industry Standards:
  • CSA (Canadian Standards Association)
  • Underwriters Laboratory, Inc. (UL)

Applications:
  • Automotive interiors
  • Automotive exteriors
  • Sheet applications
  • Electrical lighting/switches
  • Small & large appliances
  • Beverage containers/serviceware
  • Power equipment
General Information
Additive
  • UV Stabilizer
Features
  • Good Melt Strength
  • High Clarity
  • High Impact Resistance
Uses
  • Appliances
  • Automotive Applications
  • Automotive Exterior Parts
  • Automotive Interior Parts
  • Containers
  • Electrical/Electronic Applications
  • Lighting Applications
  • Sheet
Agency Ratings
  • CSA Unspecified Rating
Forms
  • Pellets
Processing Method
  • Blow Molding
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
PhysicalNominal ValueUnitTest Method
Specific Gravity
    -- 1.20g/cm³ASTM D792, ISO 1183/A
    -- 1200kg/m³ISO 1183 1
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)6.0g/10 minASTM D1238, ISO 1133
Melt volume-flow rate (300°C/1.2 kg)5.00cm³/10minISO 1133 2
Molding Shrinkage - Flow 0.50 to 0.70%ASTM D955, ISO 294-4
Water Absorption ASTM D570, ISO 62
    23°C, 24 hr 0.15%
    Equilibrium, 23°C, 50% RH 0.32%
HardnessNominal ValueUnitTest Method
Rockwell Hardness ASTM D785
    M-Scale 73
    R-Scale 118
MechanicalNominal ValueUnitTest Method
Tensile Modulus
    -- 32410MPaASTM D638
    -- 2300MPaISO 527-2/50, ISO 527-2 4
Tensile Strength
    Yield 560.0MPaASTM D638
    Yield 60.0MPaISO 527-2/50, ISO 527-2 6
    Break 772.4MPaASTM D638
    Break 72.0MPaISO 527-2/50
Tensile Elongation
    Yield 86.0%ASTM D638
    Yield 6.0%ISO 527-2/50, ISO 527-2 9
    Break 10150%ASTM D638
    Break 150%ISO 527-2/50
Nominal strain at break > 50%ISO 527-2 11
Flexural Modulus
    -- 122410MPaASTM D790
    -- 132400MPaISO 178
Flexural Strength
    -- 1496.5MPaASTM D790
    -- 1597.0MPaISO 178
Taber Abrasion Resistance 45%ASTM D1044
FlammabilityNominal ValueUnitTest Method
Average Extent of Burning 3cmASTM D635
ImpactNominal ValueUnitTest Method
Charpy Notched Impact Strength
    23°C 55kJ/m²ISO 179/1eA
    -30°C 14.0kJ/m²ISO 179/1eA 16
    23°C 95.0kJ/m²ISO 179/1eA 17
Charpy impact strength ISO 179/1eU 18
    -30°C No Break
    23°C No Break
Notched Izod Impact
    23°C 910J/mASTM D256
    23°C 93kJ/m²ISO 180/A
Unnotched Izod Impact (23°C)No BreakASTM D256, ISO 180
Instrumented Dart Impact 19(23°C, Total Energy)90.4JASTM D3763
Tensile Impact Strength 588kJ/m²ASTM D1822
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load
    0.45 MPa, Annealed 145°CASTM D648
    0.45 MPa, Annealed 146°CISO 75-2/B
    0.45 MPa 145°CISO 75-2 20
    1.8 MPa, Unannealed 129°CASTM D648
    1.8 MPa, Unannealed 126°CISO 75-2/A
    1.8 MPa, Annealed 142°CASTM D648
    1.8 MPa, Annealed 143°CISO 75-2/A
    1.8 MPa 131°CISO 75-2 21
Vicat Softening Temperature
    -- 151°CASTM D1525, ISO 306/B50 8 22
    50°C/h, B (50N) 151°CISO 306 23
Ball Indentation Temperature 125°CIEC 60335-1
CLTE - Flow
    -40 to 82°C 6.8E-5cm/cm/°CASTM D696
    -- 7.0E-5cm/cm/°CISO 11359-2 24
ElectricalNominal ValueUnitTest Method
Volume Resistivity
    -- 2.0E+17ohms·cmASTM D257
    -- > 1.0E+13ohms·mIEC 60093 25
Dielectric Strength 17kV/mmASTM D149, IEC 60243-1
Dielectric Constant
    60 Hz 3.00ASTM D150
    1 MHz 3.00ASTM D150, IEC 60250 26
    100 Hz 3.00IEC 60250 27
Dissipation Factor
    50 Hz 1.0E-3ASTM D150
    1 MHz 2.0E-3ASTM D150, IEC 60250 28
    100 Hz 1.0E-3IEC 60250 29
Comparative Tracking Index (2.00 mm, Solution A)250VIEC 60112
FlammabilityNominal ValueUnitTest Method
Flame Rating 30UL 94
    1.59 mm HB
    3.20 mm HB
Burning Behav. at 1.6mm nom. thickn. (1.60 mm, UL)HBISO 1210 31
Burning Behav. at thickness h (3.20 mm, UL)HBISO 1210 32
Oxygen Index 3326%ISO 4589-2
OpticalNominal ValueUnitTest Method
Refractive Index 1.586ASTM D542, ISO 489
Transmittance 89.0%ASTM D1003
Haze 1.0%ASTM D1003
Note Message
1 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .50 mm/min
4 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .50 mm/min
6 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .50 mm/min
8 .50 mm/min
9 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .50 mm/min
11 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
12 .Method I (3 point load), 2.0 mm/min
13 .2.0 mm/min
14 .Method I (3 point load), 2.0 mm/min
15 .2.0 mm/min
16 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
17 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
18 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
19 .3.39 m/sec
20 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
21 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
22 .Rate A (50°C/h), Loading 2 (50 N)
23 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
24 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
25 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
26 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
27 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
28 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
29 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30 .This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
31 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
32 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
33 .This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
Resin Grade Manufacturer Category Trademark
MarFlex® 5561 Chevron Phillips Chemical Company LLC LDPE MarFlex®
RTP 6042-70A RTP Company TPE RTP
PRL NY66-G43 Polymer Resources Ltd. Nylon 66 PRL
SLOVALEN® PH 49 GF 60 Plastcom PP, Unspecified SLOVALEN®
AKROMID® T1 GF 40 natural (3463) AKRO-PLASTIC GmbH PPA AKROMID®

TEL: +86-21-58958519 Email:sales@su-jiao.com

No. 215, Lianhe North Road, Fengxian District, Shanghai, China​， COPYRIGHT SUSHENG COMPANY RIGHTS RESERVED