Order Products : sales@su-jiao.com
SCANAMID 66 A12^FC
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Polykemi AB |
| Trademark: | SCANAMID 66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AdV1Mq_SCANAMID-66-A12-FC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SCANAMID 66 A12^FC is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific or Europe. Primary characteristic: flame rated. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.14 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.4 | -- | % | |
| Flow | 0.90 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 80 | -- | ASTM D2240 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress | 95.0 | 65.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield | 4.5 | 18 | % | |
| Break | 20 | > 50 | % | |
| Flexural Modulus (23°C) | 3300 | 1900 | MPa | ISO 178 |
| Flexural Stress | 145 | 75.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | |||
| -20°C | 4.0 | -- | kJ/m² | |
| 23°C | 5.0 | 15 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature 1 | ||||
| 0.45 MPa, Unannealed | 215 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 80.0 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | > 210 | -- | °C | ISO 306/B50 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | -- | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 750 | -- | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO ALPHALOY MPA1601 | Techno Polymer Co, Ltd. | ABS+Nylon | TECHNO ALPHALOY |
| Topilene® J640 | Hyosung Corporation | PP Impact Copolymer | Topilene® |
| APTIV® 1103 | Victrex plc | PEEK | APTIV® |
| Durethan® BG 30 X H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
| Latamid 6 E02 | LATI S.p.A. | Nylon 6 | Latamid |
