Order Products : sales@su-jiao.com
SNOLEN® IM 31/52
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | JSC Gazprom neftekhim Salavat |
| Trademark: | SNOLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Aa630Y_SNOLEN-IM-31-52.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CHARACTERISTIC PROPERTIES Very good flow characteristics. Low deformation. MAJOR APPLICATIONS Medical equipment. Goods approved for contact with food. Lids/seals. Packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.948 to 0.952 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 8.0 to 12 | g/10 min | |
| 190°C/5.0 kg | 25 to 31 | g/10 min | |
| Environmental Stress-Cracking Resistance 1(80°C, 2% Arkopal) | 1.00 | hr | ISO 16770 |
| Melt Flow Ratio | 2.20 to 3.40 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 61 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Secant (23°C) | 1000 | MPa | ISO 527-2/1 |
| Tensile Stress | ISO 527-2/50 | ||
| Yield | 24.0 | MPa | |
| Break | 30.0 | MPa | |
| Tensile Strain | |||
| Yield | 10 | % | ISO 527-2 |
| Break | > 1000 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (23°C) | 2.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 64.0 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 to 280 | °C |
| Note Message | |
|---|---|
| 1 . | @ 2.5 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF9WCS (Series: DW/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Novamid® 1030J | DSM Engineering Plastics | Nylon 6 | Novamid® |
| CERTENE™ HGB-0454 | Muehlstein | HDPE | CERTENE™ |
| Dryflex® 402801S | ELASTO | SBS | Dryflex® |
| Sylvin 9067-90LMW White 1254 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
