Order Products : sales@su-jiao.com

Boda FF4685

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Trademark:	Boda
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AZokQr_Boda-FF4685.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Material Type: black perfluoroelastomer compound, hardness Shore A81-87. Features: It has excellent chemical resistance, good mechanical properties an outstanding thermal stability, FF4685 parts provide reliable, long-term service with wide range of aggressive industrial and electronic grade chemicals. FF4685 expands on the capabilities of FF3070 by offering much lower compression set, increased seal force retention, broader chemical resistance and higher temperature stability. Continuous Upper Service Temperature: +305°C Applications: FF4685 is used in highly aggressive chemical processing, semiconductor wafer processing, pharmaceutical, oil and gas recovery, aerospace and petroleum applications.

Message

Material Type: black perfluoroelastomer compound, hardness Shore A81-87.

Features: It has excellent chemical resistance, good mechanical properties an outstanding thermal stability, FF4685 parts provide reliable, long-term service with wide range of aggressive industrial and electronic grade chemicals. FF4685 expands on the capabilities of FF3070 by offering much lower compression set, increased seal force retention, broader chemical resistance and higher temperature stability.

Continuous Upper Service Temperature: +305°C

Applications: FF4685 is used in highly aggressive chemical processing, semiconductor wafer processing, pharmaceutical, oil and gas recovery, aerospace and petroleum applications.

General Information
Features	Good Chemical Resistance Good Thermal Stability High Heat Resistance Low Compression Set
Uses	Aerospace Applications Industrial Applications Pharmaceuticals
Appearance	Black

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	84		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	17.0	MPa	ASTM D412
Tensile Elongation (Break)	160	%	ASTM D412
Compression Set (200°C, 70 hr)	29	%	ASTM D395

Resin Grade	Manufacturer	Category	Trademark
TECHNO ABS F5450	Techno Polymer Co, Ltd.	ABS	TECHNO ABS
TEKNIFLEX® VPOA7400	Tekni-Films, a div of Tekni-Plex	Film, PVC/PE/EVOH/PE/PCTFE	TEKNIFLEX®
Sylvin 9726-60 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 9067-90 GREY 9193	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
NORYL GTX™ GTX987 resin	SABIC Innovative Plastics	PPE+PS+Nylon	NORYL GTX™