Order Products : sales@su-jiao.com
Thermoset Plastics 210
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AYezXg_Thermoset-Plastics-210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 210 is an Epoxy; Epoxide (Epoxy) material. It is available in North America. Primary attribute of Thermoset Plastics 210: Good Adhesion. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.89 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 15.2 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 28.3 | MPa | ASTM D790 |
| Compressive Strength | 27.6 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 2.0 Mix Ratio by Volume: 2.0 | ||
| Demold Time (25°C) | 30 to 60 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Borpeel™ WD255CF | Borealis AG | Polyolefin, Unspecified | Borpeel™ |
| Amodel® A-4122 HR WH 117 | Solvay Specialty Polymers | PPA | Amodel® |
| HiFill® PA6/6 CM40 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LUVOCOM® 1-8068/GN | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| TAFMER™ XM-5080 | Mitsui Chemicals, Inc. | PAO | TAFMER™ |
