Category: | Nylon 6 , Polyamide 6 |
Manufacturer: | HYUNDAI EP Co., Ltd. |
Trademark: | Hyundai EP PA6 |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | AWwdI7_Hyundai-EP-PA6-LS285.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Hyundai EP PA6 LS285 is a Polyamide 6 (Nylon 6) product filled with mineral. It is available in Asia Pacific. Primary characteristic: heat stabilizer. |
General Information | |
---|---|
Filler / Reinforcement |
|
Additive |
|
Features |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.49 | g/cm³ | ASTM D1505 |
Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
Ash Content | 40 | % |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength (Yield) | 96.1 | MPa | ASTM D638 |
Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
Flexural Modulus | 6860 | MPa | ASTM D790 |
Flexural Strength | 137 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C) | 59 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load (1.8 MPa, Unannealed) | 180 | °C | ASTM D648 |
Melting Temperature | 220 | °C |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Volume Resistivity | 1.0E+13 to 1.0E+15 | ohms·cm | ASTM D257 |
Dielectric Strength | 3.5 | kV/mm | ASTM D149 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
TABOREX TA 1109 MD | SILON s.ro | HDPE | TABOREX |
Versollan™ OM 1255NX-1 | PolyOne Corporation | TPE | Versollan™ |
CoREZYN® CORVE8300-35 | Interplastic Corporation | Vinyl Ester | CoREZYN® |
Geon™ Vinyl Flexible 90253 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
FHR Polypropylene AP6106-HA | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |