Order Products : sales@su-jiao.com
Dryflex® SE 80A001N U
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AWQpAt_DryflexSE80A001NU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex SE 80A001N U: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 80 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material) Colour: Translucent, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (Excluding organic solvents, aromatic and vegetable oils) Recycling: 100% Recyclable Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 - 2.0 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 80 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow | ISO 37 | ||
| 100% strain | 4.20 | MPa | ISO 37 |
| 300% strain | 5.20 | MPa | ISO 37 |
| Tensile Stress - Across Flow (Yield) | 11.8 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 750 | % | ISO 37 |
| Tear Strength - Across Flow 2 | 37 | kN/m | ISO 34-1 |
| Compression Set 3 | ISO 815 | ||
| 23°C, 72 hr | 39 | % | ISO 815 |
| 70°C, 22 hr | 56 | % | ISO 815 |
| 100°C, 22 hr | 74 | % | ISO 815 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 180 - 210 | °C | |
| Mold Temperature | 15 - 50 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on shape of the detail and placement of the gate. |
| 2 . | C method: crescent sample |
| 3 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXAMID™ 226 | SAX Polymers | Nylon 66 | SAXAMID™ |
| Bakelite® UP 802 | Hexion Inc. | Polyester, TS | Bakelite® |
| Hyundai EP Barrier E100P-R/Natural | HYUNDAI EP Co., Ltd. | Polyolefin, Unspecified | Hyundai EP Barrier |
| ICORENE® 2550 YELLOW 2538 | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
| LOXIM 315 02 HB | LOXIM Industries Private Limited | Nylon 6 | LOXIM |
