Order Products : sales@su-jiao.com
Petrothene® LR590005
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AVlds7_Petrothene-LR590005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PETROTHENE LR590005 is a high density, high molecular weight resin designed for primary insulation for electronic cables. This resin exhibits low shrinkback after extrusion, contains a lower level of antioxidant than the standard LR590001, and is not suitable for the telecommunications applications for which LR590001 was formulated. Antioxidant has been added to LR590005 along with a metal deactivator to ensure thermal stability during processing and to prevent degradation from copper while the cable is in service, respectively. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F0) | 168 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 21.7 | MPa | |
| Break | 16.2 | MPa | |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Thermal Stress Crack Resistance 1(100°C) | 336 | hr | MIL MS-17000 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 2.33 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 4.0E-5 | ASTM D1531 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 to 163 | °C | |
| Cylinder Zone 2 Temp. | 177 to 204 | °C | |
| Cylinder Zone 3 Temp. | 204 to 232 | °C | |
| Cylinder Zone 4 Temp. | 238 to 260 | °C | |
| Adapter Temperature | 246 to 260 | °C | |
| Melt Temperature | 246 to 260 | °C | |
| Die Temperature | 246 to 260 | °C |
| Note Message | |
|---|---|
| 1 . | 0 Failures in Water |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® Seal-Fit | BASF Corporation | Nylon 66/6 | Ultramid® |
| Nylene® 404 | Custom Resins Group | Nylon 6 | Nylene® |
| Flexirene® FF 25 U | Versalis S.p.A. | LLDPE | Flexirene® |
| Durethan® BKV 130 H3.0 DUS008 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
| KOPLA PA66 KUG1330BK | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
