Order Products : sales@su-jiao.com
TECOLITE KM-460(J)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AUeMhA_TECOLITE-KM-460-J-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Excellent flammability and Excellent properties. Raising the reliability of parts. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" are corresponding to the demand for raising the reliability of apparatus, such as flammability by UL regulation. "TECOLITE" have a good dimension stability under a use severe situation for a long period of time. Therefore, it is preeminent product for reliability parts. It is the best for a plug, commutators, heat-resistant electricity parts, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | |
| Molding Shrinkage | |||
| Flow 1 | 1.1 to 1.3 | % | |
| Flow 2 | 0.50 to 0.70 | % | |
| Across Flow 3 | 0.80 to 1.0 | % | |
| Water Absorption (Equilibrium) | < 0.40 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 88.0 to 108 | MPa | |
| Compressive Strength | 206 to 235 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 180 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+9 to 1.0E+10 | ohms | |
| As Molded | 1.0E+10 to 1.0E+11 | ohms | |
| Dielectric Strength | > 10 | kV/mm | |
| Arc Resistance | 180 | sec | |
| Comparative Tracking Index | 175 | V |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.710 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| 3 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 C 1000/586 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Cellidor CP 300-10 YL1044-10MCX | ALBIS PLASTIC GmbH | CAP | Cellidor |
| Grupo IDESA GPPS K-8-AL-03 | Grupo IDESA, S.A. de C.V. | PS (GPPS) | Grupo IDESA GPPS |
| Petrothene® GA601031 | LyondellBasell Industries | LLDPE | Petrothene® |
| ALTECH® SAN B 2335/720 GF30 GB5 UV | ALBIS PLASTIC GmbH | SAN | ALTECH® SAN |
