Order Products : sales@su-jiao.com

NuSil CV7-1142-1

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AUPPZy_NuSil-CV7-1142-1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Flow Rate 0.7" with 0.375" Plunge

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Flow Rate 0.7" with 0.375" Plunge

General Information
Features	Low to No Outgassing
Uses	Adhesives Aerospace Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit
CLTE - Flow	3.2E-4	cm/cm/°C

Thermoset	Nominal Value	Unit
Tack Free Time	20.0	min

Additional Information	Nominal Value	Unit
Cure System	Oxime
Extrusion Rate	20.0	g/min

Uncured Properties	Nominal Value	Unit
Color	White
Density	1.13	g/cm³
Curing Time (23°C)	1.7E+2	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Tensile Strength	4.83	MPa
Tensile Elongation at Break	300	%
Tear Strength	10.5	kN/m
Electric Strength	46	kV/mm

Resin Grade	Manufacturer	Category	Trademark
SCHULAMID® 612 GF 30 HI	A. Schulman Europe	Nylon 612	SCHULAMID®
Sarlink® TPE EE-2272N	Teknor Apex Company	TPE	Sarlink® TPE
Siloxane Masterbatch MB50-008	Multibase, A Dow Corning Company	Siloxane, UHMW	Siloxane Masterbatch
SITRALON 18E-UV-LB / C3031 red	SITRAPLAS GmbH	PC	SITRALON
Cheng Yu ML3000	Cheng Yu Plastic Company Limited	PC	Cheng Yu