Order Products : sales@su-jiao.com

Epoxies, Ect. 10-3012

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Epoxies, Ect.
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AU4tks_Epoxies-Ect-10-3012.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

10-3012 is a high strength, fast setting epoxy adhesive. This epoxy adhesive and potting compound is specially formulated for high clarity, good impact strength and water resistance.

Applications:

This outstanding adhesive is ideally suited for a wide range of jewelry, industrial, structural and electrical applications. This adhesive is an excellent choice for field repairs.

Features:

High bond strength

Water and chemical resistant

Good impact strength

Convenient 1:1 mix ratio

Room temperature cure

Fills gaps and voids

Fast setting

General Information
Features	Bondability Fast Cure Good Adhesion Good Chemical Resistance Good Impact Resistance High Clarity High Strength Low to No Water Absorption
Uses	Adhesives Electrical Parts Electrical/Electronic Applications Industrial Applications Jewelry Structural Parts
Appearance	Clear/Transparent

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity	5000	cP

Additional Information	Nominal Value	Unit
Operating Temperature	-40.0 to 250	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Mix Ratio by Weight (PBW)
Part A	1.0
Part B	1.0
Mix Ratio by Volume (PBV)
Part A	1.0
Part B	1.0
Density (25°C)	1.10	g/cm³
Curing Time	2.0	hr
Pot Life	10	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore D)	83
Lap Shear Strength	17.2	MPa
Compression Strength	75.8	MPa
Electric Strength	24	kV/mm

Resin Grade	Manufacturer	Category	Trademark
Radilon® A RV300LW 333 NER	Radici Plastics	Nylon 66	Radilon®
VolcaLite® VLSTDA.0901BT	Azdel, Inc.	PP, Unspecified	VolcaLite®
FHR EPS 54-7354	Flint Hills Resources, LP	PS (EPS)	FHR EPS
EnDura® V91A	Precision Polymer Engineering Ltd.	Fluorelastomer	EnDura®
HiFill® PA6 GF/M40 L	Techmer Engineered Solutions	Nylon 6	HiFill®