Order Products : sales@su-jiao.com
Andur 75 DGP 2/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ATwgqK_Andur-75-DGP-2-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 75 DGP-2 is a polyether (PTMG) based liquid isocyanate- terminated prepolymer. An elastomer with a hardness of 75 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'- methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. Andur 75 DGP-2 was designed to have a longer pot life for those who require more time for casting. Due to its lower %NCO, compared to other 75D materials, Andur 75 DGP-2 is much more economical to process, as approximately 20% less curing agent is required. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 76 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 39.3 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 49.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 250 | % | ASTM D412 |
| Compression Set | 30 | % | ASTM D395B |
| Bayshore Resilience | 55 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.0 | min | |
| Demold Time (100°C) | 15 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 75 to 77Die C Tear, ASTM D1004: 1200 pliAverage Split Tear, ASTM D1938: 380 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 75 DGP 2: 160-180°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1003 TFE 15 | RTP Company | PBT | RTP |
| Chemlon® 225-15 MGHU | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| Elastron® G G103.A60.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Hostalen PP H5416K | PolyMirae | PP Random Copolymer | Hostalen PP |
| TECACOMP® PEEK 450 TF10 blue 3905 | Ensinger GmbH | PEEK | TECACOMP® |
