Order Products : sales@su-jiao.com
MIRASON™ F312
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | MIRASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AQgWoD_MIRASON-F312.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MIRASON™ F312 is a Low Density Polyethylene material. It is available in Asia Pacific. Primary attribute of MIRASON™ F312: Good Stiffness. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 13.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Melting Temperature | 109 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROLOX 10 Z2 | Taro Plast S.p.A. | PBT | TAROLOX |
| Triax® 2105 | INEOS ABS (USA) | PC+ABS | Triax® |
| ALTECH® PA66 D 2030/106 GF30 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Braskem PE LH-218 | Braskem | LLDPE | Braskem PE |
