Order Products : sales@su-jiao.com
NuSil MED-4070
| Category: | Rubber , Rubber |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | APzwXp_NuSil-MED-4070.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. High consistency rubber, or HCR, consists of high molecular weight polymer combined with silica to produce a material that can be molded, extruded, or calendared into a useful end product. An HCR has the consistency of clay and is primarily formulated in a one or two part system (peroxide and platinum catalysts respectively). Most platinum cure high consistency rubbers are two component systems with an easy-to-work-with 1:1 mix ratio. Comments: ABRASION/FATIGUE RESISTANT |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (100% Strain) | 4.14 | MPa |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 | ||
| Post Cure Time (177°C) | 4.0 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum | ||
| Plasticity: 120 mils |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.19 | g/cm³ | |
| Curing Time (138°C) | 0.17 | hr | |
| Pot Life (25°C) | 120 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 70 | ||
| Tensile Strength | 9.14 | MPa | |
| Tensile Elongation at Break | 700 | % | |
| Tear Strength | 49.9 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4085 TFE 10 | RTP Company | PPA | RTP |
| Axiall PVC 8757 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Ferro PP LPP40BN21BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| Enviramid® N2340MG20HL BK | Ravago Manufacturing Americas, LLC | Nylon 6 | Enviramid® |
| PLUSTEK PA325G5 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
