Order Products : sales@su-jiao.com
MAJORIS CFR210
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | APgeUm_MAJORIS-CFR210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CFR210 is a halogen flame retardant compound with UL 94 V0, intended for injection moulding. The product is available in natural (CFR210) but other colours can be supplied on request. APPLICATIONS CFR210 is intended for the injection moulding of electrical component. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.36 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield | 25.0 | MPa | ISO 527-2/50 |
| Fracture | 24.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 8.0 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 2500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 1.5 | kJ/m² | ISO 179 |
| 23°C | 2.5 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C) | 2.5 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 127 | °C | ISO 75-2/B |
| Ball Pressure Test (125°C) | Pass | IEC 60695-10-2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | UL 94 | |
| 3.20 mm | V-0 | UL 94 | |
| 2.50 mm | 5VA | UL 94 | |
| Glow Wire Flammability Index | 960 | °C | IEC 60695-2-12 |
| Oxygen Index | 28 | % | ISO 4589-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 210 - 240 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Nylon 1015 GNKF | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| Hostacom TRC 333N C12334 | LyondellBasell Industries | PP Copolymer | Hostacom |
| KEBATRON® PPS C1065X1 | BARLOG plastics GmbH | PPS | KEBATRON® |
| Plasmer 1045NM/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| ULTEM™ 2300 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
