Order Products : sales@su-jiao.com
EMPILON® 632
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | EMPILON |
| Trademark: | EMPILON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | APTK1X_EMPILON-632.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMPILON® 600 series compound having high transparency, good resilience, excellent mechanical properties and lower specific weight are specially designed for medical, food and anti-vibration related applications. Hydrogenated Styrenic Block Copolymer is the main content of this 600 series compound. They have low specific gravity and the hardness range is provided from Shore OO 33~Shore A 81. They can be processed by way of ordinary plastic machine for Injection, extrusion or calendaring etc. EMPILON® 600-series compound are non-toxic and free of Pb, Cd, Hg, Cr6+, Sb, As, Ba, Se, halogen and DOP plasticizer, they comply with the Restriction of the use of certain Hazardous Substance directive in electrical and electronic equipment (RoHS 2002/95/EC) and SONY SS-00259 4th that prohibit products that contain Pb, Cd,Hg, Cr6+, PBB and PBDE etc. They are 100% recyclable and comply with the Waste Electrical and Electronic Equipment directive (WEEE 2002/95/EC). EMPILON® 600-series compound retain good mechanical properties both before and after heat resistance, weathering and solvent tests and won't hydrolyze in water. It is not necessary to dehumidify the material before use. For coloring, please select color master batch based on material PE or EVA directive with the exception of PVC. Higher screw speed and backpressure are required for better colorant dispersion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage 1 | |||
| Flow | 1.7 | % | |
| Transverse flow | 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 29 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.490 | MPa | ASTM D412 |
| Tensile Strength | 7.35 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 850 | % | ASTM D412 |
| Compression Set (23°C, 70 hr) | 67 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 168 hr) | 62 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (125°C, 168 hr) | 19 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 125°C, 168 hr) | -9.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 165 - 175 | °C | |
| Middle Temperature | 175 - 190 | °C | |
| Front Temperature | 185 - 195 | °C | |
| Nozzle Temperature | 185 - 200 | °C | |
| Processing (Melt) Temp | 180 - 200 | °C | |
| Mold Temperature | 40.0 - 50.0 | °C | |
| Injection Pressure | 3.43 - 4.90 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.490 - 0.785 | MPa | |
| Screw Speed | Medium |
| Injection instructions |
|---|
| Hold Time: 5 sec.Cycle Time: 15~30 sec. |
| Note Message | |
|---|---|
| 1 . | Reference Only |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Daelim Po1y® PP-333K | DAELIM INDUSTRIAL CO., LTD. | PP Random Copolymer | Daelim Po1y® |
| DIC.PPS FZ-6600-B2 | DIC Corporation | PPS | DIC.PPS |
| ExxonMobil™ LLDPE LL 6101 Series | ExxonMobil Chemical | LLDPE | ExxonMobil™ LLDPE |
| KumhoSunny PBT 3710FG-NH | Shanghai KumhoSunny Plastics Co., Ltd. | PBT | KumhoSunny PBT |
| TechnoFin PP EPDM T 10 | TechnoCompound GmbH | PP+EPDM | TechnoFin |
