Order Products : sales@su-jiao.com
CONAP® AD-6405
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AP9QCS_CONAP-AD-6405.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CONAP AD-6405 is a two-component, non-TDI, liquid polyurethane casting system produced under very carefully controlled conditions. This elastomeric system features excellent toughness, water resistance, and physical properties. CONAP AD-6405 is recommended as a general purpose potting compound, sealant, or adhesive for medical applications, particularly where good penetration, hydrolytic stability, low exotherm, low shrinkage, and good cutting properties are required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D1475 | ||
| -- 1 | 0.970 | g/cm³ | |
| -- 2 | 1.15 | g/cm³ |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A 3 | 95 | ||
| Shore A 4 | 44 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 5 | 22.1 | MPa | ASTM D412 |
| Tensile Elongation 6(Break) | 150 | % | ASTM D412 |
| Tear Strength 7 | 78.8 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity | |||
| 25°C | 4000 | cP | |
| 50°C | 900 | cP |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| 3 . | Fully Cured |
| 4 . | After 30 minutes @ 60°C |
| 5 . | Die C |
| 6 . | Die C |
| 7 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Network Polymers PP PPH 30 3000 | Network Polymers, Inc. | PP Homopolymer | Network Polymers PP |
| Ferro PP TPP10AC94BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| ESTABIO PL 0560 T10 | Cossa Polimeri S.r.l. | Biodeg Polymers | ESTABIO |
| Plaslube® PC 02000 | Techmer Engineered Solutions | PC | Plaslube® |
| Lifoflex® UV FLAM 40600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
