Order Products : sales@su-jiao.com
CROSSVINIL EK/82 AZ
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | CROSSVINIL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AO6C8D_CROSSVINIL-EK-82-AZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CROSSVINIL EK/82 AZ is a special compound having different self-extinguishing characteristics. CROSSVINIL EK/82 AZ is lead free and has low halogen emissions. Suitable for extrusion of electrical cables insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | > 15.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 150 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 4.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -8.0 | % | IEC 60811 |
| Heat Aging - 1 hr (150°C) | Pass | IEC 60811 |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Bending Test (-15°C) | Pass | ||
| Hot Pressure Test - Residual 1(90°C) | 65.0 | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | 14 | % | IEC 60754-1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 2.5E+14 | ohms·cm | IEC 60167 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 30 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 175 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Cylinder Zone 5 Temp. | 185 | °C | |
| Die Temperature | 190 | °C |
| Note Message | |
|---|---|
| 1 . | 4 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C Z4520 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| WPP PE WPP651 | Washington Penn Plastic Co. Inc. | LLDPE | WPP PE |
| Exceed™ 4518PA | ExxonMobil Chemical | mPE | Exceed™ |
| Gallonprene® GP540-7502(n)F | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Latamid 66 H2 G/50-V0KB1 | LATI S.p.A. | Nylon 66 | Latamid |
