Order Products : sales@su-jiao.com
Westlake LDPE EM182AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AHXBc5_Westlake-LDPE-EM182AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EM182 is a low density formulation used for injection molding. It is an outstanding material for molding lids and other container closures because it processes easily on automatic molding equipment to produce molding items with excellent gloss, clarity, and warpage resistance. Users must make their own determination that their use of this product is safe, legal and technically suitable for their intended applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 8.27 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 90 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3 | 228 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 149 to 166 | °C |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propafilm™ RGP120 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| Salflex 622LI | Salflex Polymers Ltd. | PP Copolymer | Salflex |
| Mirakutoran® TPU E680 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| ULTEM™ 2200 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Devcon HV Tile Adhesive | Devcon | Epoxy | Devcon |
