Category: | HDPE , High Density Polyethylene |
Manufacturer: | LyondellBasell Industries |
Trademark: | Lupolen |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | AGfSEk_Lupolen-5461-B-Q-471.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Lupolen 5461 B Q 471 is a high density polyethylene (HDPE) powder with high melt viscosity for extrusion of peroxide crosslinked pipes (PE-Xa). Typical application: Crosslinked pipes, PE-Xa (peroxide) It is not intended for medical and pharmaceutical applications. |
General Information | |
---|---|
Features |
|
Uses |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.953 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 10 | g/10 min | ISO 1133 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Ball Indentation Hardness (H 132/30) | 49.0 | MPa | ISO 2039-1 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus - Secant (23°C) | 1100 | MPa | ISO 527-2/1 |
Tensile Stress (Yield, 23°C) | 28.0 | MPa | ISO 527-2/50 |
Tensile Strain (Yield, 23°C) | 8.0 | % | ISO 527-2/50 |
Extrusion | Nominal Value | Unit | |
---|---|---|---|
Melt Temperature | < 280 | °C |
Extrusion instructions |
---|
Melt temperatures above 280 °C should be avoided to prevent potential degradation. In case higher temperatures are needed please contact LyondellBasell. |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RJM SI301G15 | RJM International, Inc. | PET | RJM |
NaturePlast NP DU 101 | NaturePlast | Nylon 610 | NaturePlast |
Exact™ 9371 | ExxonMobil Chemical | Plastomer | Exact™ |
Edgetek™ AS-000/000 AS NC505 | PolyOne Corporation | ABS | Edgetek™ |
Karina CRYSTAL CLEAR PVC COMPOUND -E 75/318-IS-RG | Karina Ind. e Com. de Plásticos Ltda | PVC, Rigid | Karina |