Order Products : sales@su-jiao.com
Vythene™ VYT/13E-55 CLEAR TL 0025
| Category: | PVC+PUR , Polyvinyl Chloride + PUR |
| Manufacturer: | AlphaGary |
| Trademark: | Vythene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AFUTnI_Vythene-VYT-13E-55-CLEAR-TL-0025.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VYT/13E-55 Clear TL 0025 is a "non-toxic" Vythene compound which combines the best qualities of a thermoplastic elastomer and vinyl at an economical cost. Its unique combination of properties lends flexibility, toughness, tear strength and low temperature resistance to a variety of demanding applications. VYT/13E-55 Clear TL 0025 processes easily on conventional extrusion equipment and does not require pre-drying. VYT/13E-55 Clear TL 0025 is produced from FDA sanctioned ingredients and it has been designed to pass the USP Class VI biocompatibility requirements. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 to 1.19 | g/cm³ | ASTM D792 |
| Water Absorption (Equilibrium) | 0.32 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 10 sec, 3.18 mm | 52 to 58 | ||
| Shore A, 15 sec, 6.35 mm | 49 to 55 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (1.91 mm) | 2.51 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 9.86 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 470 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 38.2 | kN/m | ASTM D1004 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -57.0 | °C | ASTM D746 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 168 to 174 | °C |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P240 HS | Nilit Plastics | Nylon 66 | POLYNIL® |
| Taipol 3206 | TSRC Corporation | SBS | Taipol |
| Crastin® SO653 NC010 | DuPont Performance Polymers | PBT | Crastin® |
| Fainplast PVC PH 90/UV | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| OmniLon™ PA6 GR13 | OMNI Plastics, LLC | Nylon 6 | OmniLon™ |
