Order Products : sales@su-jiao.com
RTP ESD C 1200 T-70D
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AEtGyt_RTP-ESD-C-1200-T-70D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Electrically Conductive - ESD Protection |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.70 - 1.5 | % | ASTM D955 |
| Moisture Content | 0.010 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay 1 | sec | FTMS 101C 4046.1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm) | 27.6 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 100 | % | ASTM D412 |
| Tear Strength 4 | 140 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | |||
| -- | < 1.0E+6 | ohms | ASTM D257 |
| -- | < 1.0E+5 | ohms | ESD STM11.11 |
| Volume Resistivity | < 1.0E+3 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 185 - 218 | °C | |
| Mold Temperature | 37.8 - 60.0 | °C | |
| Injection Pressure | 68.9 - 138 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | MIL-PRF-81705D, 5kV to 50 V, 12% RH |
| 2 . | C mold, 500 mm/min |
| 3 . | Mouth die C, 500 mm/min |
| 4 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYshine PBT D231 GF30 | Polykemi AB | PBT | POLYshine |
| Sindustris PP EI5003L | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| TEREZ PA 6.6 7500 TF 15 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| XAREC™ N WA 7020 | Idemitsu Kosan Co., Ltd. | SPS+Nylon | XAREC™ |
| SIBUR Synthetic Rubber SSBR-2560 Grade A | SIBUR | SBR, Solution | SIBUR Synthetic Rubber |
