Order Products : sales@su-jiao.com
Kemcor LD 1434
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AEQWcs_Kemcor-LD-1434.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This grade is approved by Telecom Australia for use in telecommunication cables and meets the following raw material specifications: AS 1049 - 1986, Type 03SBC ASTM D 1248 IC, Grade J3, W2 BS6234 - 1987 Type 03C |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.25 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -85.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.60 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 1.0E-3 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® GSF25/15-66 22L-N | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| NEFTEKHIM PS 825ES | Nizhnekamskneftekhim Inc. | PS (HIPS) | NEFTEKHIM PS |
| Ecomann® Bioresin EM40000 | Shenzhen Ecomann Biotechnology Co., Ltd. | PHA | Ecomann® |
| LUVOCOM® 50/GF/20/TF/10/BK | Lehmann & Voss & Co. | PC | LUVOCOM® |
| ALTECH® PA66 ECO 2020/116 GF20 IM | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
