Order Products : sales@su-jiao.com
Diofan® B 203
| Category: | PVDC , Polyvinylidene Chloride |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Diofan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ADQhZm_Diofan-B-203.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DIOFAN®A 036 is a PVDC latex, suitable as a tough bottom layer, used under the coating of paper or thick cardboard, and then covered with an appropriate surface coating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| pH | 1.7 | ||
| Surface tension- Foaming trend | 42 | mN/m | |
| Film formation- Minimum film forming temperature | 14 | °C | |
| Solids Content | 51 | % | |
| Density | |||
| Coated film (dry) | 1.650 | g/cm³ | |
| Coating 1 | 1.270 | g/cm³ | |
| Emulsion type | anion | ||
| Viscosity- Dynamic (20°C) | 17 | mPa·s |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen transfer rate- (25°C, 85% RH, 1.0 µm) 2 | 11 | cm³/m²/bar/24 hr | ASTM D3985 |
| Heat Sealing Threshold- 0.4 N/cm 3 | 123 | °C | |
| Maximum heat seal resistance- 20 psi - 1s - 1 heated jaw | 1.0 | N/cm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Shelf life (23°C) | 6 | month |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 4(vs. Itself - Dynamic) | 0.35 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission Rate 5(38°C, 90% RH, 1.0 µm) | 11 | g/m²/24 hr | ASTM F1249 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 加工- 干燥 DIOFAN® A 036 涂料作为韧性底漆，上面应批覆一层面漆如DIOFAN® A 050。该材料表面张力低，逆向凹版辊涂法和气刀法可作为合适的涂布方法。 高品质涂层需要适当的干燥手段，因为高温有助于形成更好的阻隔性能。 食品及药品法规 DIOFAN ®A 036 生产用单体符合2011年1月14日欧盟委员会条例第10 / 2011的要求。 所有元素均在欧洲决策委员会AP 2004（1） （计划与食品接触的表面涂层）中列出。 -DIOFAN® A 036 符合美国FDA第 21 CFR 175.320、176.170和 176.180章规定。 DIOFAN® A 036生产用单体符合欧洲议会（EC ）签署的1907 / 2006法规及其理事会于2006年12月18日签署的有关的化学品注册、评估、授权和限制法规（REACH。 SolVin将根据需要提供进一步认证文件. ISO 认证： 经评估，在Tavaux生产的DIOFAN偏二氯乙烯共聚物（PVDC）的生产、内部转移及交付、设计和开发管理体系的实施，符合 ISO 9001： 2008、 ISO 14001： 2004 和OHSAS18001：007的要求。 |
| Note Message | |
|---|---|
| 1 . | Coating on BOPP; Coating weight: 2.7g/m; Auxiliary package: 20 g/kg wax 3 g/kg silicon |
| 2 . | Coating on BOPET film. Diofan® coating weight dry: 2.5 g/ m²; used additive package: 5 g/kg wax + 5 g/kg silica after 2 days storage at 40°C |
| 3 . | Coating on BOPP; Coating weight: 2.7g/m; Auxiliary package: 20 g/kg wax 3 g/kg silicon -20 PSI-1s -1 heating clamp |
| 4 . | BOPP coating; Weight of paint: 2.7g/m; Additive package: 20 g/kg wax 3 g/kg silicon |
| 5 . | BOPP coating; Weight of paint: 2.7g/m; Additive package: 20 g/kg wax 3 g/kg silicon |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMATOP PP HOMO 350NA | Amco Polymers | PP Homopolymer | PRIMATOP |
| RTP 4089 HB | RTP Company | PPA | RTP |
| Alpha PVC GW 3026 NAT.LCF | AlphaGary | PVC, Unspecified | Alpha PVC |
| Laril 13 G/10-V1 | LATI S.p.A. | PPE+PS | Laril |
| Petrothene® NA420127 | LyondellBasell Industries | LDPE+EVA | Petrothene® |
