Order Products : sales@su-jiao.com
Formolene® 3355O
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ACDN04_Formolene-3355O.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 3355O is a high melt flow random copolymer with fast cycle time and easy mold release. It is designed for injection molding including thin wall applications requiring exceptionally good mold and part release. The use of an advanced clarifier with its aesthetic values, yellowness index and low haze, makes it an excellent choice for ‘see-through' house wares and rigid packaging. Formolene® 3355O meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the "Products" section on our website (http://www.fpcusa.com/ourproducts.html). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 55 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 29.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 14 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 59 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 85.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Injection Haze Plaque (1.00 mm) | 15 | % | FTTC 5606 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® ET IR320 | Covestro - Polycarbonates | PC | Makrolon® |
| PVC Film 06-A0370R-87NT | Teknor Apex Company | PVC, Flexible | PVC Film |
| ESTAPROP H 1280 T8 | Cossa Polimeri S.r.l. | PP Homopolymer | ESTAPROP |
| KRATON® G7723 GS-N | Kraton Polymers LLC | SEBS | KRATON® |
| PERCOM® MCS12A | A. Schulman Europe | PP Copolymer | PERCOM® |
