Order Products : sales@su-jiao.com

NuSil FS-3775

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ABr6cE_NuSil-FS-3775.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: High Temperature, Fuel Resistant

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: High Temperature, Fuel Resistant

General Information
Features	Electrically Conductive Fuel Resistant High Heat Resistance
Uses	Adhesives Aircraft Applications Sealants

Thermoset	Nominal Value	Unit
Tack Free Time	8.0	min

Additional Information	Nominal Value	Unit
Cure System	Acetoxy
Extrusion Rate	250	g/min
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.29	g/cm³
Curing Time (23°C)	72	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	3.10	MPa
Tensile Elongation at Break	400	%
Tear Strength	7.01	kN/m

Resin Grade	Manufacturer	Category	Trademark
POPELEN V-431	Lotte Chemical Corporation	PP Impact Copolymer	POPELEN
Chiao Fu PA6 MC212G45 NAT	Chiao Fu Enterprises Co., Ltd.	Nylon 6	Chiao Fu PA6
Diablend 4500/V0 HF	DTR S.r.l. (Develop Thermoplastic Resins)	PC+ABS	Diablend
INELEC PA610CF30	Infinity LTL Engineered Compounds	Nylon 610	INELEC
INEOS PP 101-ZB25	INEOS Olefins & Polymers Europe	PP Homopolymer	INEOS PP