Order Products : sales@su-jiao.com
Royalcast® 2501
| Category: | PUR-Ether , Polyurethane (Polyether based) |
| Manufacturer: | Chemtura |
| Trademark: | Royalcast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A5z9Rk_Royalcast-2501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ROYALCAST 2501 combines the rigidity of an engineering plastic with an excellent balance of physical properties. When cured with MBCA, ROYALCAST 2501 yields an 80 Shore D hardness material with a flexural modulus of 165,000 psi and a notched izod impact strength of 9 ft-lbs/in. As a castable material, ROYALCAST 2501 is processed under conditions typically used in an Adiprene/Vibrathane (polyurethane) open casting operation. This allows the molder to use low cost tooling to produce a full range of rigid parts, including:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.4 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 20°C) | 114 | ASTM D785 | |
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 100°C | 71 | ||
| Shore D, 70°C | 75 | ||
| Shore D, 20°C | 80 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 55.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 170 | % | ASTM D638 |
| Flexural Modulus | 1140 | MPa | ASTM D790 |
| Flexural Strength | 41.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (20°C) | 480 | J/m | ASTM D256 |
| Unnotched Izod Impact (20°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 62.0 | °C | ASTM D648 |
| CLTE - Flow | 1.4E-4 | cm/cm/°C | Internal Method |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 34 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life | 1.5 | min | |
| Demold Time | 25 | min | |
| Post Cure Time (116°C) | 16 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4007 TFE 10 | RTP Company | PPA | RTP |
| Velocity® LCF40-PA6 | PlastiComp, Inc. | Nylon 6 | Velocity® |
| DAI-EL™ G-7452 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| LNP™ VERTON™ RV00AES compound | SABIC Innovative Plastics | Nylon 66 | LNP™ VERTON™ |
| Hyflon® PFA P140X | Solvay Specialty Polymers | PFA | Hyflon® PFA |
