Order Products : sales@su-jiao.com
SureSpec LLC6-500
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A2krSS_SureSpec-LLC6-500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLC6-500 is a copolymer certified prime resin designed for High-Flow Injection Molding of thin-walled, high quality applications. LLC6-500 features easy processability over a wide range of molding conditions, high gloss surface, good rigidity, fast cycle times, low temperature toughness and warpage free moldings. Suggested processing temperature is 170 to 210°C, with the mold at 20 to 40°C. LLC6-500 complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, F50) | 5.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 15.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 90 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 440 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -65.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 210 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ HDPE LP 8000 | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Karina BLACK PVC COMPOUND 650-48/ 1-E | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Panlite® EN-8515N | TEIJIN LIMITED | PC | Panlite® |
| OTECH CPE XLE4808 - Cable Jacket | OTECH Corporation | CPE | OTECH CPE |
| Sylvin 5175-92 White 1542 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
