Order Products : sales@su-jiao.com
DeWAL DW 232 P
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | DeWAL Industries |
| Trademark: | DeWAL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9ylLVH_DeWAL-DW-232-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DW 232P is a low density, porous PTFE film product. It has the inherent benefits of PTFE: exceptional chemical resistance, crush resistance, reduced shrinkage, dimensional stability, temperature range from -400 to +500 F, low coefficient of friction and an available thickness range of 0.010" to 0.100". DW 232P are ideal for use in venting of gasses while holding liquids, oil - water separation applications, gasketing and filters for heat/chemical resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Thickness | 254.0 to 508.0 | µm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Air Flow 1 | |||
| 254.0 µm | 2.0 | sec | |
| 508.0 µm | 5.0 | sec | |
| Core ID | 76.2 to 152 | mm | |
| Core Type | Plastic or Cardboard | ||
| Porosity | 50.0 | vol% | |
| Width 2 | 12.7 to 635 | mm |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD | ASTM D882 | ||
| Yield, 250 µm | 1.38 | MPa | |
| Yield, 510 µm | 2.07 | MPa |
| Note Message | |
|---|---|
| 1 . | Gurley Densometer (100cc/1sq in/20oz) |
| 2 . | Product Dependent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoprene® HF GF/30 V0 NERO900 | SO.F.TER. SPA | PP Homopolymer | Tecnoprene® |
| Sindustris PE XL2701BK | Sincerity Australia Pty Ltd. | PE, Unspecified | Sindustris PE |
| AKROMID® A3 GF 50 natural (2423) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| AKROMID® C3 GF 50 5 XTC natural (4946) | AKRO-PLASTIC GmbH | Nylon 66/6 | AKROMID® |
| Kingfa PA6-RG001 | Kingfa | Nylon 6 | Kingfa |
